![background image](http://html1.mh-extra.com/html/canon/sx50-realis-sxga-lcos-projector/sx50-realis-sxga-lcos-projector_command-reference-manual_4206910034.webp)
e
Commands
DGAMMA
Mode
Control Setting
Referenc
Function
Dynamic gamma
Parameter
ID
Parameter Meaning
1
ON
0
OFF
The RANGE command can be used to obtain the parameter range that can be set at that time.
Response
An 'i:OK' is returned after setting is successful.
Description
This sets the dynamic gamma function to ON or OFF.
(1)
This command is identical to the Dynamic gamma function in the Image adj. menu.
(2) This sets the currently selected input signal and image mode.
(3) The GET command can be used to retrieve the current dynamic gamma function state.
Example
Setting
> DGAMMA=
1
This turns on the dynamic gamma function.
< i:OK
Reference
>
GET DGAMMA or ?DGAMMA
This retrieves the dynamic gamma function state.
< g:DGAMMA=1
Obtain settable parameters
> RANGE DGAMMA
< r:DGAMMA=I,0,1
*Commands are indicated by “>”, and responses are indicated by “<”.
Supported Command States
Power supply
Input
Mode
OFF
ON
PM
D-RGB
A-RGB1 A-RGB2
Comp
Video
S-Video
None
Remote
Local
×
○
×
○
○
○
○
○
○
○
○
×
※
If a state is not supported, “INVALID_MODE” or “NOT_POWER_SUPPLIED” is returned with the Err response.
※
When the power supply state is in the process of switching, an “i:BUSY” reply may be sent.