Canon SX50 - REALiS SXGA+ LCOS Projector, Command Reference Manual, Page: 19 / 66

e
Commands
LOCAL Mode Control Setting Referenc
Function Switch to Local mode
Parameter None
Response An “i:OK” is returned after switching to the mode is successful.
Description This switches to Local mode.
(1) Only the following commands can be used during Local mode.
•REMOTE
•LOCAL
•RC
•MAIN
•GET MODE
(2) This command can be used in any projector state.
(3) The current mode can be viewed with the GET command.
Example Mode switching
> LOCAL
< i:OK
Mode viewing
> GET MODE or ?MODE
< g:MODE=LOCAL
*Commands are indicated by “>”, and responses are indicated by “<”.
Supported Command States
Power supply
Input Mode
OFF ON PM
D-RGB A-RGB1 A-RGB2 Comp Video S-Video None Remote Local
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○