![background image](http://html1.mh-extra.com/html/canon/sx50-realis-sxga-lcos-projector/sx50-realis-sxga-lcos-projector_command-reference-manual_4206910025.webp)
e
Commands
HPOS VPOS
Mode
Control Setting
Referenc
Function
Horizontal and vertical position adjustment
Parameter
Adjustment value
Number
The RANGE command can be used to obtain the parameter range that can be set at that time.
Response
An 'i:OK' is returned after setting is successful.
Description
This adjusts the horizontal and vertical position on the screen.
(1) This command is identical to the Horizontal position and Vertical position functions under the [Input signal
settings] in the [Display settings] menu.
(2) The GET command can be used to retrieve the current horizontal and vertical position.
Example
Setting
> HPOS=12
This sets the horizontal value to 12.
< i:OK
Reference
> GET VPOS or ?VPOS
<
g:VPOS=8
Obtain settable parameter range (Min, Max)
> RANGE HPOS
< r:HPOS=N,0,820
*Commands are indicated by “>”, and responses are indicated by “<”.
Supported Command States
Power supply
Input
Mode
OFF
ON
PM
D-RGB
A-RGB1 A-RGB2
Comp
Video
S-Video
None
Remote
Local
×
○
×
×
○
○
×
×
×
×
○
×
※
If a state is not supported, “INVALID_MODE”, “NOT_POWER_SUPPLIED” or “INVALID_SOURCE” is returned with the Err response.
※
If the required signal input is not available, an 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
※
When the power supply state is in the process of switching, an “i:BUSY” reply may be sent.