Canon Super G3 Fax Board-AF1 Service Manual Download Page 71

Page: 71 / 74

Chapter 6

6-3

##762

[T]

at time of ECM transmission, DCN is received after transmission of PPS-EOM.

##763

[T]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS, or T5 time-out
(60 sec) has occurred.

##764

[T]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOM.

##765

[T]

at time of ECM transmission, no meaningful signal is received after transmission of PPS-EOP, causing the procedural signal to be transmitted
more than specified.

##767

[T]

at time of ECM transmission, DCN is received after transmission of PPS-EOP.

##768

[T]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOP, or T5 time-out
(60 sec) has occurred.

##769

[T]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-EOP.

##770

[T]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-NULL, causing the procedural signal to be
transmitted more than specified.

##772

[T]

at time of ECM transmission, DCN is received after transmission of EOR-NULL.

##773

[T]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-NULL, or T5 time-
out (60 sec) has occurred.

##774

[T]

at time of ECM transmission, ERR is received after transmission of EOR-NULL.

##775

[T]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-MPS, causing the procedural signal to be
transmitted more than specified.

##777

[T]

at time of ECM transmission, DCN is received after transmission of EOR-MPS.

##778

[T]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission EOR-MPS, or T5 time-out
(60 sec) has occurred.

##779

[T]

at time of ECM transmission, ERR is received after transmission of EOR-MPS.

##780

[T]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-EOM, causing the procedural signal to be
transmitted more than specified.

##782

[T]

at time of ECM transmission, DCN is received after transmission of EOR-EOM.

##783

[T]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-EOM, or T5 time-
out (60 sec) has occurred.

##784

[T]

at time of ECM transmission, ERR is received after transmission of EOR-EOM.

##785

[T]

at time of ECM transmission, no meaningful signal is received after transmission of EOR-EOP, causing the procedural signal to be
transmitted more than specified.

##787

[T]

at time of ECM transmission, DCN is received after transmission of EOR-EOP.

##788

[T]

at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of EOR-EOP, or T5 time-out
(60 sec) has occurred.

##789

[T]

at time of ECM transmission, ERR is received after transmission of EOR-EOP.

##790

[R]

at time of ECM reception, ERR is transmitted after transmission of EOR-Q.

##791

[T/R]

while ECM mode procedure is under way, a signal other than a meaningful signal is received.

##792

[R]

at time of ECM reception, PPS-NULL cannot be detected over partial page processing.