Canon Super G3 Fax Board-AF1, Service Manual

Page: 48 / 74

Chapter 5
5-6
5.2.7 SSSW-SW14
5.2.7.1 Functional Construction
0025-3109
T-5-10
5.2.7.2 Detailed Discussions of Bit 2
0025-3110
Use it to specify whether to convert or not convert an inch-configuration resolution into a millimeter-configuration resolution for image read in G3 transmission:
either in sub scanning direction only or in both main and sub scanning directions. The setting is valid only when bit 1 of SW05 of #1 SSSW is set to '1'.
5.2.7.3 Detailed Discussions of Bit 4
0025-3111
Use it to specify whether to declare or not declare an inch-configuration resolution to the other machine for G3 communication: if 'declare' is selected, the machine
will indicate that it reads and records at an inch-configuration resolution using the DIS, DCS, or DTC signal.
5.2.8 SSSW-SW23
5.2.8.1 Functional Construction
0025-4512
T-5-11
5.2.8.2 Detailed Discussions of Bit 7
0025-4513
When logging in Meap, the login name is automatically registered as the 99th addresser name. This SW is for setting whether this 99th name is set as the default
or not.
The default setting is "No". If you change this SW to "Yes", the login name becomes the default of the addresser name, and it is recorded at the facsimile header
and transmitted to the device on the receiving side.
5.2.9 SSSW-SW25
5.2.9.1 Functional Construction
0025-3112
T-5-12
5.2.9.2 Detailed Discussions of Bit 0
0025-3113
Use it to select the transmission telephone number indicated on the report at the end of transmission.
caller's number: indicates the telephone number of the caller on the report.
number of other party: indicates the telephone number (CSI signal data) sent from the other part on the report.
Bit Function 1 0
0 not used - -
1 not used - -
2 direction of scanning for inch/mm conversion both main and sub
scanning directions sub scanning direction
only
3 not used - -
4 inch-configuration resolution declaration declare do not declare
5 not used - -
6 not used - -
7 not used - -
Bit Function 1 0
0 not used - -
1 not used - -
2 not used - -
3 not used - -
4 not used - -
5 not used - -
6 not used - -
7 Set the login name as the default of the addresser name enable do not(dafault)
Bit Function 1 0
0 transmission telephone number indicated report other party's caller's
1 not used - -
2 not used - -
3 not used - -
4 not used - -
5 not used - -
6 not used - -
7 not used - -