Canon PS-7000, Service Manual

Page: 6 / 67

Chapter 1 Safety Instructions
1-3
3. Notes on Installation
3.1. Place of installation
- Avoid placing the PS-7000 on unstable surface or those that can vibrate, to prevent the machine from
falling.
- Avoid covering the ventilation window (at the bottom) with anything. Place the machine 10 cm or
more away from the wall. Insufficient ventilation can cause malfunction.
- Keep the machine away from humidity, dust, direct sun light, heat or flame, to avoid fire or electrical
shock hazards. Use the machine in the operating environment 5 to 35˚C and 20 to 80%RH without
any dew condensation.
- Keep the machine away from flammable liquids such as alcohol and thinner, to avoid fire or electrical
hazards.
3.2. Power Supply
- Do not touch the power cord with wet hands, to avoid electrical shock hazards.
- Plug in the power cord until it touches the end. Insufficient plugging can cause fire or electrical shock
hazards.
- Do not use any power cords other than that packed with the PS-7000. Use of any other power cord
can cause fire or electrical shock hazards. Do not use the packed power cord with other equipment.
- Do not modify, pull, or bend the power cord, or place the power cord under heavy materials. Current
can leak from where the power cord is scratched, and it can cause fire or electrical shock hazards.
- Avoid multiple wiring with use of Y-shaped cable. It can cause fire or electrical shock hazards.
- Do not put anything around the AC outlet so that the power supply plug can be removed immediately in
case of emergency. Delay in removing the plug can cause fire or electrical shock hazards.