Canon PowerShot SX260 HS, User Manual

Page: 224 / 246

224
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (p. 16).
Memory card locked
• The write-protect tab of the SD/SDHC/SDXC memory card or Eye-Fi card is set to the
locked position. Switch the write-protect tab to the unlocked position (p. 15).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (p. 16).
Memory card error (p. 186)
• If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk
(p. 16).
Insufficient space on card
• There is not enough free space on the memory card to shoot (pp. 53, 89, 115, 139) or
edit images (pp. 172 – 177). Either erase unneeded images (p. 163) or insert a memory
card with enough free space (p. 15).
Change the battery pack. (p. 15)
No Image.
• The memory card does not contain any images that can be displayed.
Protected! (p. 159)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play back
AVI/RAW
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Cannot magnify!/Cannot play back this content in Smart Shuffle/Cannot
rotate/Cannot modify image/Cannot register this image!/Cannot modify/
Cannot assign to category/Unselectable image./No identification information
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
Edit ID Info* (p. 73), Magnify* (p. 156), Smart Shuffle* (p. 158), Categorize (p. 167),
Rotate (p. 165), Edit* (pp. 172 – 177), Assign as Start-up Image* (p. 185), Print List*
(p. 210), and Photobook Set-up* (p. 214).
• Grouped images cannot be processed (p. 101).
Invalid selection range
• When specifying a range for image selection (pp. 171, 161, 164, 212), you attempted
to choose an initial image that was after the final image, or vice-versa.
On-Screen Messages
COP
Y