Canon PowerShot SX260 HS User Manual Download Page 46 | Manualshive

Page: 46 / 246

Canon PowerShot SX260 HS User Manual Download Page 46

Using GPS Function

46

*

Logger function is [On] (p. 48).

•

When GPS signal reception is not possible indoors or in other places away
from coverage (p. 45), try going outside where there is an unobstructed
view of the sky. Hold the camera correctly (p. 44) and point the GPS
antenna up at the sky.

•

will normally be displayed within a few minutes when the camera is

used in areas with ample GPS coverage, such as outdoor areas with an
unobstructed view of the sky. If

is not displayed, move to an area

without obstructions (such as buildings) between the camera and GPS
satellites and wait a few minutes until it appears.

Reception Status Display

(on)

GPS signal received. Location can be recorded.*

(blinking)

Looking for GPS signal.*

(on)

No GPS signal.

Tips When

is Displayed

COP

Y

«
...
44
45
46
47
48
...
»

Summary of Contents for PowerShot SX260 HS























































































































































































































































Reviews:

No comments