Canon PowerShot SX260 HS, User Manual

Page: 185 / 246

Adjusting Basic Camera Functions
185
Access the [Start-up Image] screen
in Playback mode.
z
Press the
1
button.
z
Following the previous procedure, choose [2]
and press the
m
button.
Choose one of your shots.
z
Choose an image and press the
m
button.
After [Register?] is displayed, choose [OK]
(either press the
qr
buttons or turn the
5
dial), and then press the
m
button.
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy images
on the memory card to a computer, or take other steps to back them up.
An Eye-Fi card (p. 216) contains software on the card itself. Before formatting
an Eye-Fi card, install the software on a computer.
Access the [Format] screen.
z
Choose [Format], and then press the
m
button.
Customizing the Start-up Screen
• The previous start-up setting is overwritten when you assign a new
start-up image.
• You can assign the operating sounds and start-up images for your camera from
the included software. For details, refer to the
ImageBrowser EX User Guide .
Formatting Memory Cards
COP
Y