manualshive.com logo in svg

Canon PowerShot S330 Digital ELPH, User Manual

Share
Download
Canon PowerShot S330 Digital ELPH User Manual Download Page 77

How Low Ink Warning Setting Works

77

Routine Maintenance

How Low Ink Warning Setting Works

The low ink warning notifies you of low ink levels during printing. The Low Ink Warning has 
been preset to display automatically.

Note

➤

Refer to “

Modifying the low ink warning setting

” to change the setting if you 

do not want to display the Low Ink Warning.

■

What is Low Ink Warning?

Reset the ink counter for the ink tank installed.

When ink becomes low...

The low ink warning alerts.

When you install a new ink tank...

When you reset the ink counter, the counter will assume that the ink tank is full, regardless 
of how much ink actually remains. Resetting the counter on a 

new

 ink tank is the only way 

to match the counter value with the actual ink volume, so you should only enable the low ink 
warning and reset the ink counter when installing a new ink tank. 

➡

How to Display Low Ink Warning Correctly

Summary of Contents for PowerShot S330 Digital ELPH








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands