manualshive.com logo in svg

Canon PowerShot S330 Digital ELPH, User Manual

Share
Download
Canon PowerShot S330 Digital ELPH User Manual Download Page 164

An Error Message is Displayed on the Screen

164

Troubleshooting

Error Writing to USBxxx 

■

Ensure that the printer is turned on.

If the POWER lamp is off, turn the printer on.
If the POWER lamp is flashing green, the printer is initializing. Wait until the POWER 
lamp stops flashing.

■

Ensure that the printer is securely connected to the computer.

Note

➤

If you are using a switch box or other device, remove and reconnect the 
printer directly to the computer, then try printing again.
If printing is now successful, there may be a problem with the device.
Also there could be a problem with the cable(s). Replace the cable(s) and 
try printing again.

■

If spooling is enabled, disable it to send the print data directly to the printer and try 
printing again.

1

Open the Printer Properties dialog box from the 

Start

 menu.

➡

Opening the Printer Properties dialog box directly from the Start 

menu

Windows

Summary of Contents for PowerShot S330 Digital ELPH








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands