Canon PowerShot S330 Digital ELPH User Manual Download Page 124

Page: 124 / 199

T-Shirt Transfers

124

Printing Media

T-Shirt Transfers

This paper is used to produce iron-on transfers. The image is printed backward (mirror
image) when the

Media Type

is set to T-Shirt Transfer in the printer driver.

Note

➤

For more information please see the instructions packaged with your media
for proper loading and handling.

■

• Load only one sheet at a time.

• If the T-shirt transfer is curled, flatten it by curling it in the opposite direction.

• Load the paper with the side that does not have green lines facing up.

• Set the paper thickness lever to the right.

Paper thickness lever

Summary of Contents for PowerShot S330 Digital ELPH








































































































































































































Search results

Summary of Contents for PowerShot S330 Digital ELPH

Reviews:

Brands by name

Popular brands

Canon PowerShot S330 Digital ELPH, User Manual

Search results

Summary of Contents for PowerShot S330 Digital ELPH

Reviews:

Brands by name

Popular brands