Canon Pixma E480 series, Online Manual

Page: 207 / 776

• TEL line auto select (China only)
If you select ON , the telephone line type is selected automatically.
If you select OFF , you can select the telephone line type manually.
Setting the Telephone Line Type
Adv. FAX settings
• Auto redial
Enables/disables automatic redialing.
If you select ON , you can specify the maximum number of redial attempts and the length of time the
machine waits between redial attempts.
• Dial tone detect
Avoids mistransmission when reception and transmission occur at the same time.
If you select ON , the machine transmits the fax after confirming the dial tone.
Note
• This setting may not be available depending on the country or region of purchase.
• Pause time settings
Sets the length of pause time for each when you enter "P" (pause).
• TTI position
Selects the position of the sender information (outside or inside the image area).
• Remote RX
Enables/disables remote reception.
If you select ON , you can specify the remote reception ID.
Remote Reception
• Color transmission
When faxing color documents using the ADF, selects whether to convert them into black & white data
if the recipient's fax machine does not support color faxing.
If you select If incompatible, end , the machine does not send color documents when the recipient's
fax machine does not support color faxing.
• RX image reduction
Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.
If you select ON , you can select the image reduction direction.
• Adv. communication
◦ ECM TX
Selects whether to send faxes in Error Correction Mode (ECM).
Transmission/Reception of Faxes Using ECM
◦ ECM RX
207