Canon Perfect Binder-C1, Replacement Manual

Page: 47 / 54

Chapter 2
2-29
2) Remove the connector cover [1].
- Screw [2]
F-2-125
3) Remove the connector [1] and the three screws [2] in the rear side.
F-2-126
4) Remove the three scerws [1], and then remove the delivery roller 1/2 unit
[2].
F-2-127
F-2-128
5) Disconnect the 2 connectors [1], remove the reuse band [2] and free the
harness from the edge saddles and wire saddles, and then take out the
spine bending harness (left) [3].
F-2-129
[2] [1]
[1]
[2] [2]
[1] [2]
CAUTION:
When reinstalling the delivery roller 1/2 unit, position it with the pressure
arms [4] on its reverse side in the holes [5] of the spine unit. If it is difficult
to position the delivery roller 1/2 unit, turn the spine drive pulley [6]
manually to move the spine unit.
[4]
[5] [6]
[1] [3] [2] [1]