Canon OPTURA30 Instruction Manual Download Page 47

Page: 47 / 166

Advanced Functions -

Recording

Selecting the Program AE Mode

1. Set the program selector to

2. Press the SET dial.

A list of the program AE modes appears.

3. Select a mode and press the SET dial.

The symbol of the mode appears on the upper left corner of the

screen.

❍

The setting resets to the Auto mode when you change the position of the
program selector.

❍

Do not change the mode during recording as the brightness of the image may
change abruptly.

❍

Sports/Portrait mode:
The picture may not appear smooth when played back.

❍

Sand & Snow mode:
- The subject may become overexposed in dark surroundings. Check the

image on the screen.

- The picture may not appear smooth when played back.

❍

Low Light mode:
- Moving subjects may leave a trailing afterimage.
- Picture quality may not be as good as in other modes.
- The camcorder may have difficulty to focus automatically.

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

Summary of Contents for OPTURA30







































































































































































Search results

Summary of Contents for OPTURA30

Reviews:

Related manuals for OPTURA30

Brands by name

Popular brands

Canon OPTURA30, Instruction Manual

Search results

Summary of Contents for OPTURA30

Reviews:

Related manuals for OPTURA30

Brands by name

Popular brands