Canon OPTURA30 Instruction Manual Download Page 119

Page: 119 / 166

119

Using a Memory Car

5. Select the mix type matching the sample image you have selected.

• The screen shows the combined image.

• When you have selected [C. ANIMATION], select [ANIMAT. TYPE] and select between

[CORNER], [STRAIGHT] and [RANDOM].

6. To adjust the mix level, select [MIX LEVEL] and adjust it with the SET

dial.

7. Close the menu.

“CARD MIX” flashes.

8. Press the CARD MIX button.

• “CARD MIX” stops flashing.

• The combined image appears.

❍

Card mix cannot be used when [STILL I. REC] is set to [

FINE] or

[

NORMAL].

❍

Movies recorded on a memory card cannot be combined with camcorder
recordings.

❍

Additional sample images are provided on the supplied DIGITAL VIDEO
SOLUTION DISK. Refer to

Adding Still Images from Your Computer to the

Memory Card

in the

Digital Video Software Instruction Manual.

Sample Images

Following sample images are pre-recorded on the supplied SD Memory Card.

Card Chroma Key

Card Luminance Key

Summary of Contents for OPTURA30







































































































































































Search results

Summary of Contents for OPTURA30

Reviews:

Related manuals for OPTURA30

Brands by name

Popular brands

Canon OPTURA30, Instruction Manual

Search results

Summary of Contents for OPTURA30

Reviews:

Related manuals for OPTURA30

Brands by name

Popular brands