Canon OPTURA30 Instruction Manual Download

Page: 16 / 166

Loading/Unloading a Cassette

Use only videocassettes marked with the

logo.

1. Slide the OPEN/EJECT switch and

open the cassette compartment
cover.

The cassette compartment opens

automatically.

2. Load/unload the cassette.

• Load the cassette with the window facing

the grip belt.

• Unload the cassette by pulling it straight

out.

3. Press the

mark on the cassette

compartment until it clicks.

4. Wait for the cassette compartment to

retract automatically and close the
cassette compartment cover.

❍

Do not interfere with the cassette compartment while it is opening or closing
automatically, or attempt to close the cover before the cassette compartment
has fully retracted.

❍

Be careful not to get your fingers caught in the cassette compartment cover.

If the camcorder is connected to a power source, cassettes can be loaded/
unloaded even if the POWER switch is set to OFF.

Tape
protection tab

Summary of Contents for OPTURA30







































































































































































Search results

Summary of Contents for OPTURA30

Reviews:

Related manuals for OPTURA30

Brands by name

Popular brands

Canon OPTURA30, Instruction Manual

Search results

Summary of Contents for OPTURA30

Reviews:

Related manuals for OPTURA30

Brands by name

Popular brands