![background image](http://html.mh-extra.com/html/canon/np6218/np6218_service-manual_62356185.webp)
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
6-19
16) Remove the two screws
@3
, and detach the fixing film motor unit
@4
.
Figure 6-216
17) Remove the screw
@5
, and detach the cover
@6
.
18) Remove the screw
@7
, and disconnect the heater connector
@8
.
Caution:
If you are removing the screw
@7
, you must first make sure that the heater connector
has cooled.
The screw
@7
is a special screw; take care not to lose it.
19) Remove the C-ring
@9
, and detach the bushing
#0
, leaving the fixing heater behind.
Figure 6-217
Caution:
Do not touch the surface of the heater.
@4
@3
@8
@9 #0
@6
@7
@5