![background image](http://html.mh-extra.com/html/canon/np6218/np6218_service-manual_62356170.webp)
Reference:
Normally, control 2 is used. Use control 1 to increase the control temperature if a
fixing fault occurs; or use control 3 to lower the control temperature if offset occurs.
(See the p. 10-32.)
Figure 6-103
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
6-4