![background image](http://html.mh-extra.com/html/canon/np6218/np6218_service-manual_62356124.webp)
3) Place a newspaper or the like on the floor or a desk top, and pour out the toner from
the developing assembly.
4) Remove the two screws
e
, and remove the blade assembly*
r
.
* consisting of the blade and its mount.
Figure 4-331
3. Removing the Developing Cylinder Side Seal
1) Remove the developing assembly from the copier.
2) Remove the blade assembly.
Caution:
The blade must be installed at high precision. Do not remove it in the field. If
necessary, remove it intact on its mounting plate.
3) Remove the screw
q
, and remove the front cover
w
.
Figure 4-332
COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
4-48
e
r
q
w