manualshive.com logo in svg

Canon MX530 series, Online Manual

Share
Download
Canon MX530 series Online Manual Download Page 810

Troubleshooting Problems Sending Faxes (Fax Driver)

Check 1

 Is the power turned on?

You cannot send faxes if the power is turned off. Press the 

ON

 button to turn the power on.

If you disconnected the power cord without turning off the power (one of the buttons on the operation panel is lit),
reconnecting it turns on the power automatically.

If you disconnected the power cord after pressing the 

ON

 button to turn off the power (no buttons on the

operation panel are lit), reconnect it, then press the 

ON

 button to turn on the power.

If the power was turned off due to power failure, etc., the power is automatically turned on when the power failure
is resolved.

Important

• Confirm that all lamps on the operation panel are off before unplugging the power cord, then unplug the

power cord.

If a power failure occurs or you unplug the power cord, all faxes stored in the machine's memory are
deleted.

Note

• If the faxes stored in the machine's memory are deleted by a power failure or unplugging the power cord,

the list of the faxes deleted from the machine's memory will be printed after turning the machine on.

Check 2

 Is a document being sent from memory or a fax being received into memory?

When the message for the transmission/reception is displayed on the machine's LCD (Liquid Crystal Display)
monitor, a fax is being sent from/received into machine's memory.

Check 3

 Is the telephone line type set correctly?

Check the telephone line type setting and change it as necessary.

Check 4

 Is 

Dial tone detect

 set to 

ON

?

Resend the fax after a while.

If you still cannot send the fax, select 

OFF

 for 

Dial tone detect

 in 

Advanced FAX settings

 under 

FAX settings

.

Check 5

 Is the recipient's fax number correct?

Check the recipient's fax number, then send the document again.

Sending a FAX (Fax Driver)

Note

• For details on how to change the recipients registered in the address book, see "

Edit or Remove a

Recipient from an Address Book (Fax Driver)

."

Check 6

 Does an error occur during transmission?

Check if a message is displayed in the computer screen.

If displayed, check the message, then resolve the error.

Check 7

 Does a printer error occur?

810

Summary of Contents for MX530 series





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands