Canon MV650i Instruction Manual Download Page 20

Page: 20 / 155

Mastering

the Basics

Loading a Cassette

Use only video cassettes marked with the

logo.

Loading and Unloading

1. Slide and hold the OPEN/EJECT

switch and open the cassette
compartment cover.

The cassette compartment opens

automatically.

2. Load/unload the cassette.

• Load the cassette with the window facing

the grip belt and the REC/SAVE tab facing

upward.

• Unload the cassette by pulling it straight

out.

3. Press the

mark on the cassette

compartment until it clicks.

Wait for the cassette compartment to retract

automatically.

4. Close the cassette compartment

cover.

❍

Do not interfere with the cassette compartment while it is opening or closing
automatically or attempt to close the cover until the cassette compartment has
fully retracted.

❍

Be careful not to get your fingers caught in the cassette compartment cover.

❍

If the camcorder is connected to a power source, cassettes can be
loaded/unloaded even if the POWER switch is set to OFF.

❍

flashes if no cassette is inserted when turning on the power (in CAMERA

and PLAY (VCR) mode).

❍

With some types of tapes, the remaining tape display may not be accurate.

OPEN/EJECT

PUSH

Tape
protection tab

click

2_D73PAL_E(13-42) 02.12.26 9:22 PM Page 20

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MV650i




























































































































































Search results

Summary of Contents for MV650i

Reviews:

Related manuals for MV650i

Brands by name

Popular brands

Canon MV650i, Instruction Manual

Search results

Summary of Contents for MV650i

Reviews:

Related manuals for MV650i

Brands by name

Popular brands