Canon MV650i Instruction Manual Download Page 58

Page: 58 / 155

Using the Full Range

of Featur

Night

Use this mode to record in dark places. The shutter speed is

adjusted automatically. It is useful when recording in places with

changing light conditions (such as in amusement parks).

❍

Night mode cannot be used in CARD CAMERA

mode.

❍

Moving subjects may leave a trailing afterimage.

❍

Picture quality may not be as good as in other modes.

❍

White points may appear on the screen.

❍

Autofocus may not work as well as in other modes. In such case, adjust the focus manually.

Super Night (CAMERA mode)

In CAMERA mode, use this mode to record in very dark places. The

shutter speed is adjusted automatically. The White LED lights up

automatically illuminating the subject in the centre of the screen,

allowing you to record brightly in colour.

Low Light Plus (CARD CAMERA mode)

In CARD CAMERA mode, use this mode to record in dark places.

The shutter is fixed at a slow shutter speed. The White LED lights up

illuminating the subject in the centre of the screen, allowing you to

record brightly in colour.

❍

The range of the White LED is limited. Check the image on the screen when recording.

❍

Use this mode for recordings at close range (up to 2m).

❍

Moving subjects may leave a trailing afterimage.

❍

Picture quality may not be as good as in other modes.

❍

White points may appear on the screen.

❍

Autofocus may not work as well as in other modes. In such case, adjust the focus manually.

MV650i

MV630i

MV650i

3_D73PAL_E(43-85) 02.12.26 9:26 PM Page 58

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MV650i




























































































































































Search results

Summary of Contents for MV650i

Reviews:

Related manuals for MV650i

Brands by name

Popular brands

Canon MV650i, Instruction Manual

Search results

Summary of Contents for MV650i

Reviews:

Related manuals for MV650i

Brands by name

Popular brands