Canon MultiPASS MP390 User Manual Download Page 92

Page: 92 / 187

Preparing Your Machine For Fax

Chapter 9

Printing The DIRECTORY DIAL List

You can print a list of the recipients registered for directory dialing. You may want to keep the list
near your machine to refer to it when dialing.

Follow this procedure:

Press [Additional Functions], and then press [Set].

Use [

] or [

] to select <

3.REPORTS/LISTS

Press [Set].

Use [

] or [

] to select <

2.DIRECTORY DIAL

Press [Set].

Use [

] or [

] to select whether to print the list with the destination names

in alphabetical order.

– <

YES

> [

Prints the list with the destination names in alphabetical order.

– <

> [

Prints the list with the numerical order (01 - 40) in the directory.

The DIRECTORY DIAL list is printed.

FAX SETTINGS

3.REPORTS/LISTS

REPORTS/LISTS

1.ACTIVITY REPORT

REPORTS/LISTS

2.DIRECTORY DIAL

SORTED OUTPUT

YES

(-) NO

(+)

Summary of Contents for MultiPASS MP390




























































































































































































Search results

Summary of Contents for MultiPASS MP390

Reviews:

Canon MultiPASS MP390, User Manual, Page: 92 / 187

Search results

Summary of Contents for MultiPASS MP390

Reviews: