Canon MultiPASS MP390 User Manual Download Page 29

Page: 29 / 187

Chapter 2

Document And Paper Handling

Loading Paper

IMPORTANT

Load plain paper (letter- or A4-size) when receiving faxes.

Follow this procedure:

Press [

NOTE

When not replacing an ink tank, be sure to press [

], and no other key.

Set the paper thickness lever to the right or left according to the paper
type.

NOTE

• For the appropriate paper thickness lever position for each paper type, see page 21.
• For details on setting the paper thickness lever, see page 26.

Open the multi-purpose tray

, then pull

out the tray extension

The tray extension can be extended in two parts.

Place a stack of paper (print side up) in

the multi-purpose tray

, and pinch the

paper guide

and adjust it to the left

side of the stack

IMPORTANT

Make sure the stack does not exceed the paper
limit mark

Summary of Contents for MultiPASS MP390




























































































































































































Search results

Summary of Contents for MultiPASS MP390

Reviews:

Canon MultiPASS MP390, User Manual, Page: 29 / 187

Search results

Summary of Contents for MultiPASS MP390

Reviews: