Canon MultiPASS MP390 User Manual Download Page 65

Page: 65 / 187

Chapter 4

Photo Printing From A Memory Card

Use [

] or [

] to select the paper type.

– <

PHOTO PAPER PRO

Suitable for Photo Paper Pro.

– <

PLAIN PAPER

Suitable for plain paper.

– <

HIGH RES. PAPER

Suitable for High Resolution Paper.

– <

PHOTO PAPER PLUS

Suitable for Photo Paper Plus Glossy.

– <

GLOSSY

Suitable for Glossy Photo Paper.

– <

OTHER PHOTO PAPER

Suitable when using photo paper other than that described
above (such as Matte Photo Paper), or if you do not know the
paper type.

NOTE

• In order to obtain optimal quality print results, when printing photographs, use

Canon-recommended Photo Paper Pro or Photo Paper Plus Glossy.

• If you selected <

> or <

> in step 9, you can only select <

PHOTO PAPER PRO

PHOTO PAPER PLUS

>, or <

OTHER PHOTO PAPER

• We do not recommend using plain paper for photo printing.

Press [Set].

Select whether to enable borderless printing or not. (See page 47)

NOTE

• If you selected <

PLAIN PAPER

> in step 11, you cannot enable borderless printing.

• You can select the amount of image that extends off the paper. (See page 47)

Press [Set].

Select whether to enable date printing or not. (See page 49)

Press [Set].

Select whether to enable vivid photo printing or not. (See page 48)

NOTE

If you selected <

PLAIN PAPER

> in step 11, you cannot enable vivid photo printing.

Press [Set].

Use [

] or [

] to view your settings on the LCD.

Press [Color].

NOTE

• To cancel printing, press [Stop/Reset].
• The image printed is enlarged or reduced automatically according to the paper size printed onto.

Depending on the paper size you are printing onto, image cropping may occur, with or without
using the borderless printing feature.

• Pressing [Black] does not start printing.

Ex:

[SELECT RANGE]

PRO LTR

[SELECT RANGE]

NO.001-010

Summary of Contents for MultiPASS MP390




























































































































































































Search results

Summary of Contents for MultiPASS MP390

Reviews:

Canon MultiPASS MP390, User Manual, Page: 65 / 187

Search results

Summary of Contents for MultiPASS MP390

Reviews: