Canon MultiPASS MP390 User Manual Download Page 27

Page: 27 / 187

Chapter 2

Document And Paper Handling

Transparen-
cies

Letter
(8 1/2 in.

11 in./

215.9 mm

279.4 mm)

A4
(8 1/4 in.

11 3/4 in./

210 mm

297 mm)

Printing from
your computer/
copying

• This film is ideal for printing presentation

material for use with overhead projectors.

• Load one sheet of plain paper as the last

sheet in the stack.

• Although you can print on either side of

the transparencies, best results can be
obtained by printing on the side that curls
when held by the edge.

• Remove each sheet from the paper output

tray as soon as it is printed.

• Do not touch the printed surface or stack

the transparencies until the ink has dried.

• If you are storing the transparencies for a

long period of time, cover the printed sides
with plain paper before storing.

T-Shirt
Transfers

Letter
(8 1/2 in.

11 in./

215.9 mm

279.4 mm)

Printing from
your computer/
copying

• This paper is used to produce iron-on

transfers.

• Use mirror printing to print or copy the

image onto the T-shirt transfer.

• Load the paper with the side that does not

have green lines facing up.

• If the T-shirt transfer is curled, flatten it by

curling it in the opposite direction.

• The T-shirt transfer should be used as soon

as it is printed.

• Refer to the manuals supplied with the

T-shirt transfer for details on how to use
this paper.

• When copying, set the paper type to

HIGH RES.

>, and the image quality to

FINE (PHOTO)

Paper Type

Size

Purpose

Guidelines And Restrictions

Summary of Contents for MultiPASS MP390




























































































































































































Search results

Summary of Contents for MultiPASS MP390

Reviews:

Canon MultiPASS MP390, User Manual, Page: 27 / 187

Search results

Summary of Contents for MultiPASS MP390

Reviews: