Canon MultiPASS MP390 User Manual Download Page 109

Page: 109 / 187

Chapter 11

Receiving Faxes

107

Setting The Receive Mode

Follow this procedure:

Canceling Receiving

Press [Stop/Reset] and follow any instructions on the LCD.

Press [Additional Functions].

Press [Set] twice.

Use [

] or [

] to select the receive mode.

– <

FAX/TEL AUTO SW

Set to automatically switch between fax and voice calls. Faxes
will be received automatically, and the machine will ring for
voice calls. (If you connected a telephone to your machine, the
telephone will not ring.)

– <

FAX ONLY MODE

Set to automatically receive faxes only. (If you connected a
telephone to your machine, the telephone will not ring.)

– <

DRPD

Set if you have subscribed to a Distinctive Ring Pattern
Detection (DRPD) service offered by some companies.

– <

MANUAL MODE

Set for the machine to ring for fax and voice calls. Fax calls
must be answered manually.

– <

ANS.MACHINE MODE

Set for the answering machine connected to your machine to
respond to an incoming call first, and then to receive faxes
automatically.

Press [Set].

The receive mode will be displayed on the bottom left of the LCD.

Ex:

RECEIVE MODE

FAX/TEL AUTO SW

Ex:

12/04/2003 THU 15:30

FaxTel STANDARD

Receive mode

Summary of Contents for MultiPASS MP390




























































































































































































Search results

Summary of Contents for MultiPASS MP390

Reviews:

Canon MultiPASS MP390, User Manual, Page: 109 / 187

Search results

Summary of Contents for MultiPASS MP390

Reviews: