Canon MK5000, User Manual

Page: 96 / 240

92
C
o
nt
ents
Preparation/
Setup
Pr
int U
sing a
C
omput
er
Appendix
Index
P
rint/Sa
ve
Input/Edit
Names of
Components
M
aint
enanc
e/
Print
er S
ettings
Tr
ouble
-
shooting
Cutter Settings
Changing the Set Cut
This product automatically cuts the print media when printing is fi nished. (Full cut) In addition,
a half cut is made between the tubes and labels after printing, so that you can cut the tubes by
hand or cleanly peel off labels from release paper.
Half cut Full cut
A1 Pump Room
■ Changing the Half Cut Settings
The default setting is "(Half Cut) On."
If you do not want to use a half cut, you can print the cut line (solid/dotted line).
Half cut
Cut line
settings
Details Print Preview
On
(Default
Setting) -
After printing, cut lines are added
between tubes and labels.
A1
Pump Room
Half cut
Off
Off
No cut between tubes or labels
after printing, and no cut line will
be printed.
No cut line
A1 Pump Room
Line
A solid cut line will be printed
between tubes and labels after
printing.
Line
A1 Pump Room
Dotted
A dotted cut line will be printed
between the printed tubes and
labels.
A1 Pump Room
Dotted
NOTE
• When printing on a plate, no half cut is made regardless of the half cut setting. However, the cut line
will be printed as set.