Canon MK5000 User Manual Download Page 167

Page: 167 / 240

163

Specify the number of tubes (or labels) to be printed, and click [OK].

Specify the number of tubes (or labels) to be
printed in the range of 1 to 10.

Click [OK] to start distributed printing.

NOTE

• If an error occurs in distributed printing, a message will be

displayed. Check the status of the printer and deal with

the error.

If there are any pages that could not be printed due to the

error, click [Yes]. The page list of the printer where the error

occurred (the [Distributed Print Recovery] dialog box) will

be displayed. Select the pages you want to reprint and

click [OK] to reprint them on the printer that is online.

Summary of Contents for MK5000

















































































































































































































































Search results

Summary of Contents for MK5000

Reviews:

Related manuals for MK5000

Brands by name

Popular brands

Canon MK5000, User Manual

Search results

Summary of Contents for MK5000

Reviews:

Related manuals for MK5000

Brands by name

Popular brands