201
4
Use [ ] or [ ] to select "On" and press the [Enter] key.
5HZLQGPRYHPHQW
Off
On
5
Press the [Shift]+[Canc] keys.
The display returns to the character input
display.
IMPORTANT
• When a plate is printed with the Plate Full cut set to "No" (default setting), the top of the plate will stop
at the cutter position regardless of the rewind movement setting.
• For thin or soft tubes, the tube may not feed properly if you print with the rewind movement set to
"On." In this case, set the rewind movement back to "Off " (default setting) and print.
