Canon MK5000 User Manual Download Page 161

Page: 161 / 240

157

Specify the number of tubes (or labels) to print, and click [OK].

Specify the number of tubes (or labels) to be
printed in the range of 1 to 10.

When you click [OK], printing of the compound
page will start.

NOTE

• The transfer mode and saving cannot be set.

• If the message "Unable to open printer." appears, confi rm

the following.

- The printer is turned on and the computer is connected

to the printer with a USB cable.

- The printer is selected correctly.

(P.151)

• If the message "Could not receive data from printer."

appears, the printer has not switched to the PC connection

mode. Switch the printer to PC connection mode.

(P.151)

Summary of Contents for MK5000

















































































































































































































































Search results

Summary of Contents for MK5000

Reviews:

Related manuals for MK5000

Brands by name

Popular brands

Canon MK5000, User Manual

Search results

Summary of Contents for MK5000

Reviews:

Related manuals for MK5000

Brands by name

Popular brands