Menu Options
62
[Shockless WB]
[On],
[Off]
When this setting is set to [On], makes the transition look smoother when the
white balance is changed.
[Iris Increment]
[1/2 stop]
, [1/3 stop], [Fine]
Determines the aperture value increment used when adjusting the aperture. When
this setting is set to [Fine], the increments will be smaller than 1/3 stop.
[Zoom-Iris Correct.]
[On]
, [Off]
If you are using a compatible lens*, when this setting is set to [On], the camera
will adjust the aperture as needed to keep the selected aperture value while
zooming. Because of this adjustment, the brightness of the image might
change slightly or you may hear the operation sound. When this setting is set
to [Off], the aperture will close gradually (the image will turn darker) as you
zoom but you will not hear the aperture's operation sound.
* Some EF lenses and CINE-SERVO lenses are not compatible with this
function.
[AF Mode]
[One Shot]
, [Continuous (Always On)], [Continuous (Auto Off)]
Determines the autofocus mode (
A
[One Shot]
: The camera focuses automatically one time.
[Continuous (Always On)]
: The camera focuses continuously on a subject at the
center of the screen and adjusts the focus automatically.
[Continuous (Auto Off)]
: The camera focuses automatically most of the time.
However, when shooting in dark surroundings with the camera mode set to
[Auto], the continuous AF function will be deactivated if the gain value reaches
a predetermined level to prevent unreliable focus operations. When continuous
AF has stopped working, [C. AF] will appear in gray.
This setting has no effect when the camera mode is set to [Manual].
[Focus Limit]
[Activate]
[On],
[Off]
Turns the focus limit on/off (
A
[Far]
[Set], [Reset], [Cancel]
Allows you to set the far end of the focus limit for the attached lens (
A
44).
When a focus limit has not been set, [Limit Off] will appear on the submenu
screen.
[Set]
: Saves the current focus position for the far end of the focus limit.
[Reset]
: Clears the currently set focus position.
[Cancel]
: Cancels the operation.
[Near]
[Set], [Reset], [Cancel]
Allows you to set the near end of the focus limit for the attached lens (
A
44).
When a focus limit has not been set, [Limit Off] will appear on the submenu
screen.
[Set]
: Saves the current focus position for the near end of the focus limit.
[Reset]
: Clears the currently set focus position.
[Cancel]
: Cancels the operation.
Menu item
Submenu / Setting options
