Canon LEGRIA HF S11 Page 91 Instruction Manual Download

Page: 91 / 191

Photos

Refer to this chapter for details on shooting photos – taking
photos and playing them back, capturing photos from video
and printing photos.

Basic Recording

Taking Photos

1 Set the camera mode dial to

2 Turn on the camcorder.

By default, photos are recorded in the
built-in memory. You can set the
memory card as the recording media
for photos (

40).

3 Press

halfway.

Once the focus is automatically
adjusted,

will turn green and one

or more AF frames will appear.

4 Press

fully.

The ACCESS indicator will flash as the photo is being recorded.

IMPORTANT

• Observe the following precautions while the ACCESS indicator is on or

flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.

Operating modes:

PHOTO

Summary of Contents for LEGRIA HF S11
































































































































































































Search results

Summary of Contents for LEGRIA HF S11

Reviews:

Related manuals for LEGRIA HF S11

Brands by name

Popular brands

Canon LEGRIA HF S11, Instruction Manual

Search results

Summary of Contents for LEGRIA HF S11

Reviews:

Related manuals for LEGRIA HF S11

Brands by name

Popular brands