4
4
4-17
4-17
Parts Replacement/Cleaning Procedure > Consumale Parts Requiring Periodic Replacement and Cleaning Points > Removing the Inserter feed roller (upper)
Parts Replacement/Cleaning Procedure > Consumale Parts Requiring Periodic Replacement and Cleaning Points > Removing the Inserter feed roller (upper)
Removing the Inserter separation roller (lower)
1) Remove the rear cover.
2) Increase the top cover open/
close angle.
3) Increase the middle guide
open/close angle.
4-10)
4) ) Remove five screws to remove the transfer guide.
x5
5) Remove two E-rings and one bearing to remove the
inserter separation roller (
lower
).
Removing the Inserter feed roller (upper)
1) Remove the rear cover.
2) Increase the top cover open/
close angle.
3) Remove one spring, two resin E-rings, and two
earings to remove the pickup roller unit.
x2
4) Remove one spring, two resin E-rings, and two
earings to remove the pickup roller unit.
5) Remove three E-rings, one pickup roller, and one lever to
remove the i
nserter feed roller (upper).
F-4-32
F-4-32
F-4-33
F-4-33
F-4-34
F-4-34
F-4-35
F-4-35
F-4-36
F-4-36
Summary of Contents for K1
