Canon iR3245, Network Manual

Page: 68 / 288

3
Using
a
TCP/IP
Network
3-16 TCP/IPv6 Settings
Enter the IPv6 address value in [Manual Address] and the IPv6 address prefix length in
[Prefix Length].
Enter the default router address value in [Default Router Addr.]. If you do not want to specify
the default router address, leave [Default Router Addr.] blank.
You cannot use a manual address if you leave [Manual Address] blank. You also cannot set any of the
following types of address for [Manual Address]:
Multicast address
Address composed entirely of zeros
IPv4 compatible address (an IPv6 address with the top 96 bits set to '0' and an IPv4 address in the
lower 32 bits)
IPv4 mapped address (an IPv6 address with the top 96 bits set to '0:0:0:0:0:ffff:' and an IPv4 address
in the lower 32 bits)
You cannot enter a multicast address or an address composed entirely of zeros in [Default Router Addr.].
5. On the IPv6 Settings screen, press [Use DHCPv6]
→
specify the
following.
[On] for <Use DHCPv6>: You can use DHCPv6 to obtain a stateful address from a DHCP
server.
6. On the IPv6 Settings screen, press [IP Address Range Settings]
→
specify the following.
You need to set <RX/Print Range> if you are using the iR3245N/iR3235N/iR3225N, or the
iR3245/iR3235/iR3225 with the optional UFR II Printer Kit, the optional UFR II/PCL Printer
Acesst 1.0 6251194