Canon iR3245, Network Manual

Page: 164 / 288

3
Using
a
TCP/IP
Network
3-112 IIS for Windows 2000/2000 Server/XP/Server 2003
IIS for Windows 2000/2000 Server/XP/Server 2003
The procedure below uses items of Windows 2000 as an example. Depending on yourenvironment,
the items you see on the screen may differ.
Remark
If IIS is not installed in the computer you are using, you
will need to install the version of IIS for the operating
system you are using before entering these settings.
(See "System Requirements(p.1-14).") For installation
procedures, see the manuals provided with your
operating system.
Server authentication is required for sending to a
WebDAV server. Enable authentication before using a
WebDAV server. The authentication methods available
for the server are Anonymous, Basic, or Digest
authentication, and authentication errors will occur if
you try to use another authentication method. If the
Anonymous authentication method is enabled, access
rights are assigned to all users, and IIS always
performs anonymous authentication, even if either of
the other two authentication methods are enabled.
(The priority level is Anonymous authentication >
Digest authentication > Basic authentication.) If a high
level of security is required, disable anonymous
authentication. Use the user names and passwords
registered in the address book of the WebDAV server
for the Basic and Digest authentication methods. For
instructions on how to set the authentication method
for IIS, see the IIS documentation.
The machine does not support sending to a Windows
Vista computer using WebDAV. However, it is possible
to view documents sent to the WebDAV server on the
network from Windows Vista.
When connecting to a WebDAV server via a proxy with
Digest authentication set using IIS 6.0, it is necessary
to set <Use Chunked Encoding with WebDAV
Sending> to 'On' from the control panel of the
machine. For more information on this procedure, see
the Sending and Facsimile Guide.
1. Right-click [My Computer]
→
in the [C:\Inetpub] folder, create a physical
directory to use as the sending destination.
The physical directory cannot be created in the [C:\Inetpub\wwwroot] folder, because the default DACL of
wwwroot differs from that of other directories.
2. Create a virtual directory.
Acesst 1.0 6251194