Canon iR2000 Series, Reference Manual

Page: 39 / 194

1-21 Entering the Department ID and Password
Before You Start
U
s
ing This Ma
chine
1
Entering the Department ID and Password
When Department ID Management has been set, the Department ID and Password must be
entered before operating this machine.
IMPORTANT
•
When the optional Card Reader is attached, does not function. Also, the operation described in “After Turning the
Power On” below is not necessary.
NOTE
•
When you are using the control card, the message <INSERT CONTROL CARD> appears on the display. Insert the
control card into the card slot. (See “Card Reader,” on p. 7-27.)
After Turning the Power On
After turning the power on and the machine becomes ready to scan, the display for entering the
Department ID and Password appears.
NOTE
•
For details of how to turn the power on, see “Main Power and Control Panel Power,” on p. 1-16.
1
Enter the department ID up to seven digits, using the numeric buttons, and press .
When you press , <DAC PASSWORD> will appear on the display.
If the Password is not set, proceed to step 3.
NOTE
•
If you made a mistake when entering the Department ID, press (Clear), and enter the correct value.
ENTER DAC
1234567
ID
C