Canon iR2000 Series, Reference Manual

Page: 162 / 194

Hand
ling
Options
7
7-10 Finisher-L1
Clearing Paper Jams in the Finisher-L1
If a paper jam occurs when using the finisher, a screen similar to the one shown below appears on
the touch panel display. Check where the jam occurred, and follow the procedure described below
and the procedure that appears on the touch panel display, to remove the jammed paper.
CAUTION
•
When removing jammed originals or paper, take care not to cut your hands on the edges of the original or
paper.
•
When removing jammed paper or when inspecting the inside of the machine, do not allow necklaces,
bracelets, or other metal objects to touch the inside of the machine, as this may result in burns or electrical
shock.
•
When removing paper which has become jammed inside the machine, take care not to allow the toner on the
jammed paper to come into contact with your hands or clothing, as this will dirty your hands or clothing. If
they become dirty, wash them immediately with cold water. Washing with warm water will set the toner and
make it impossible to remove the toner stains.
•
When removing paper which has become jammed inside the machine, remove the jammed paper gently to
prevent the toner on the paper from scattering and entering your eyes or mouth. If toner enters your eyes or
mouth, wash them immediately with cold water and consult a physician.
1
Open the front cover.
OPEN THE FRONT COVER
REC. PAPER JAM