CHAPTER 3 INSTALLATION
COPYRIGHT © 2002 CANON INC.
2000 2000 2000 2000
CANON iR1200/iR1300 Series REV. 0 AUG. 2002
3-2
2 Unpacking and Installing the Machine
2.1 Before Starting
Go through the following before starting to install the machine:
If the machine is moved from a cold to a warm place for installation, con-
densation can develop in its pickup/feeding assembly, causing image faults.
To avoid the condensation, leave the machine unpacked for 1 hr or more so
that it will be fully used to the room temperature.
(The term condensation refers to the development of drops of water on a
mental surface when it is brought from a cold to warm place. This occurs as
a result of rapid cooling of vapor in the air.)
2.2 Installation Procedure
Install the machine in the following order; for details, see the appropriate sections that fol-
low; after installation, be sure to clean up the area around the machine:
1. unpacking
2. fitting the cartridge
3. setting the toner bottle
4. putting paper in the cassette
5. putting paper in the manual feed tray
6. connecting the interface cable
7. connecting the modular cable (if equipped with fax functions)
8. connecting the power cord
9. fitting the delivery tray
10. checking the copy images
11. setting the printer functions
12. setting the fax functions (if equipped with fax functions)