Canon iR1200 Series, Service Manual

Page: 280 / 494

Chapter 10
10-20
10.4.6.6
Removing the ADF
Motor Unit
0006-3925
1) Disconnect the 3 connectors [1].
2) Remove the E-ring [2] and the bushing [3].
3) Remove the 3 screws [4], and detach the ADF
motor unit [5].
The ADF motor is positioned using a special tool and,
therefore, cannot be adjusted in the field. Do not
remove the ADF motor from the motor base.
F-10-65
10.4.6.7 Removing the
Separation Roller Unit
0006-3926
1) Remove the E-ring [1], gear [2], bushing[3], and
pin [4].
F-10-66
2) Remove the spring [1], screw [2], and plate [3].
3) Remove the E-ring [4], gear [5], belt [6], and
bushing [7].
F-10-67
4) Remove the 2 springs [1], and slide the shaft [2] to
detach the open/close cover unit [3].
F-10-68
5) Free the 3 hooks [1], and detach the separation
roller unit [2].
F-10-69
[4] [3] [5] [1]
[4]
[1] [2]
[3]
[1]
[2]
[4]
[2] [3] [7]
[6]
[5] [4]
[1]
[3] [2]
[1]
[2]
[1]
[1]