Canon iR1200 Series, Service Manual

Page: 480 / 494

Chapter 15
15-72
key in the control panel to go OFF.
The machine ends ESS mode for the following:
- The Energy Saver key is pressed.
- Print data arrives from the PC.
- A fax arrives.*1
- Off-hook set is detected.*1
- The report output time arrives.*1
- The timer call time arrives.*1
*1: If equipped with fax functions.
BOOK Read Test (8: BOOK TEST)
A press on '8' on the keypad from the TEST MODE menu selects the BOOK test. A press on '4' or '6' on the keypad
during this test initializes the corresponding parameter as described below:
'4' on the Keypad
The book read position parameter (#6 SCANNER 7: CCD 21, 23) is initialized.
'6' on the Keypad
The BOOK read parameter (#6 SCANNER 7: CCD 18*1, 19, 21, 23) is initialized.
*1: The term "CCD18 setting" refers to the setting for original read position adjustment executed by a press on '3' of
the keypad under 'CCD TEST' of 'TEST MODE'.
15.2.19 Service Report
0006-3306
Manually Generating Reports
The following reports may be generated manually in service mode:
T-15-58
SYSTEM (SERVICE) DATA LIST
The following shows the service soft switch settings and the service parameter settings:
Type of report Operation
SYSTEM (SERVICE) DATA
LIST Select an item under [#10REPORT] from
the service mode menu, and press the OK
key. Or, press Function key and Report key
in this order in service mode. Then select
the list to output, and press OK key.
SYSTEM DUMP LIST
KEY HISTORY REPORT
COUNTER REPORT
PRINT SPEC REPORT