Canon iR1200 Series, Service Manual

Page: 368 / 494

Chapter 14
14-12
T-14-12
T-14-13
T-14-14
T-14-15
Remedy: Provide echo remedy 1.
#009 [RX] Paper has jammed or the paper has run out
Cause: The paper has run out.
Remedy: Set new paper.
Cause: A paper jam has occurred.
Remedy: Remove the paper jam.
#011 [RX] Polling reception error
Cause: There is no original in the other party.
Remedy: Ask the operator of the other party to set the original correctly.
Cause: Transmission was attempted, and polling reception was started because
the document was not set correctly.
Remedy: Set the original correctly to transmit.
#012 [TX] The other party has run out of paper
Cause: The other party has run out of paper.
Remedy: Ask the operator of the other party to set paper.
#018 [TX] Auto dialing transmission error
Cause: The tone/pulse setting is wrong.
Remedy: Make the correct tone/pulse setting.
Cause: The connection time for the line is too long.
Remedy: 1. When registering an auto-dial number, put a relatively long pause at
the end of the telephone number to delay the start of the T0 timer.
2. Increase the T0 timer setting to prevent a time-over condition.
Cause: The line of the other party was engaged.
#005 [TX/RX] Initial identification (T0/T1) time-over