Canon iR105 Series Service Manual Download

Page: 641 / 1029

2000 2000 2000 2000

CANON iR105 REV.0 JULY 2001

SERVICE MODE

S-80

<PANEL>

Use it to turn on the control panel.

LCD-CHK

Use it to check the touch panel for missing dots.
<Using the Mode>
1) Select the item, and press the OK key.
•

The entire face of the touch panel repeats turning white, black, red,
green, and blue.

2) Press the Stop key to stop the operation.

LED-CHK

Use it to check the LEDs of the control panel.
<Using the Mode>
1) Select the item, and press the OK key.
•

The LEDs go ON in sequence.

2) Select LED-OFF to stop the operation.

LED-OFF

Use it to end a check on the LEDs of the control panel.
<Using the Mode>
1) Select the item to end LED-CHECK.

KEY-CHK

Use it to check key inputs.
<Using the Mode>
1) Select the item.
2) Press the key to check. If normal, its corresponding character appears

on the touch panel. (T00-204-01)

3) At the end, select KEY-CHECK once again to end the operation.

TOUCHKEY

Use it to adjust the coordinates of pressing and locations on the touch
panel.

• Try to match a press on the touch panel and its coordinates on the

LCD.

• If you have replaced the LCD assembly, execute this mode.

<Using the Mode>
1) Select the item, and press the OK key.
2) Press the 9 locations indicated by ‘+’ on the touch panel.

COPIER>FUNCTION>PANEL

Summary of Contents for iR105 Series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iR105 Series

Reviews:

Related manuals for iR105 Series

Brands by name

Popular brands

Canon iR105 Series, Service Manual

Search results

Summary of Contents for iR105 Series

Reviews:

Related manuals for iR105 Series

Brands by name

Popular brands