Canon iPF9000 series, Service Manual

Page: 309 / 432

Chapter 6
6-19
T-6-7
T-6-8
T-6-9
T-6-10
J2501
Pin Number Signal name IN/OUT Function
A1 N.C - N.C
A2 N.C - N.C
A3 N.C(LIFT_CAM) - N.C
A4 SNS3V OUT Power 3.3V)
A5 GND - GND
A6 /CR_HP IN Lift cam sensor output signal
A7 OUT_LIFTM_VM OUT Power supply
A8 OUT_LIFTM0_A OUT Lift motor drive signal A
A9 OUT_LIFTM2_AX_N0 OUT Lift motor drive signal AX
A10 OUT_LIFTM1_B OUT Lift motor drive signal B
A11 OUT_LIFTM3_BX_N1 OUT Lift motor drive signal BX
A12 /ATUKAIJYO IN Pressure release switch output signal
A13 GND - GND
B1 PUMPM1_AM OUT Purge motor drive signal AM
B2 PUMPM1_AP OUT Purge motor drive signal AP
B3 GND - GND
B4 PUMPR_ENCA IN Pump encoder output signal A
B5 SNS5V OUT Power 5V)
B6 PUMPR_ENCB IN Pump encoder output signal B
B7 SNS3V OUT Power 3.3V)
B8 GND - GND
B9 /CONTROL_CAM_R IN Pump cam sensor output signal
B10 GND - GND
B11 /MEDIA_R IN Media sensor output signal
B12 SNS5V OUT Power 5V)
B13 N.C - N.C
J2502
Pin Number Signal name IN/OUT Function
1 INKBENM1_AM OUT Right valve motor drive signal AM
2 INKBENM1_AP OUT Right valve motor drive signal AP
3 SNS3V OUT Power 3V)
4 GND - GND
5 /INKBEN_OPEN_R IN Right valve open/close detection sensor output signal
6 /TANK_COVER_R IN Right ink tank cover switch output signal
7 GND - GND
8 SNS3V OUT Power 3V)
9 GND - GND
10 /INKBEN_CAM_R IN Right ink tank agitation cam sensor output signal
J2503
Pin Number Signal name IN/OUT Function
1 GND - GND
2 ROLL_SNS IN Roll media sensor output signal
3 SNS5V OUT Power 5V)
J2601
Pin Number Signal name IN/OUT Function
1 POWER_ON IN Power switch signal
2 GND - GND
3 RGV20(+5V) OUT Power 5V)
4 BUZZER OUT Buzzer control signal
5 PDO OUT Panel IC control signal
6 +3.3V OUT Power 3.3V)
7 PDI OUT Panel IC data signal
8 HDD_LED OUT HDD lamp control signal
9 /PRESET OUT Panel reset signal
10 GND - GND
11 PCK OUT Panel IC clock signal