manualshive.com logo in svg

Canon iPF655 - imagePROGRAF Color Inkjet Printer, User Manual

Share
Download
Canon iPF655 - imagePROGRAF Color Inkjet Printer User Manual Download Page 898

Cause

Corrective Action

When 

Detect Mismatch

 in the Control Panel menu

is set to 

Pause

 or 

Warning

, the width of the loa-

ded roll does not match the width specified in 

Fit

Roll Paper Width

 in the printer driver.

Make sure the roll width selected in the dialog box displayed
when you select 

Fit Roll Paper Width

 in the printer driver

matches the width of the roll loaded in the printer, and then try
printing again.

Paper size not detected.

Cause

Corrective Action

Paper has been loaded askew, or warped paper has been
loaded.

Follow these steps to reload the roll.

1.

Push the Release Lever back.

2.

Adjust the right edge of the roll to make it parallel to
the orange Paper Alignment Line.

3.

Pull the Release Lever forward.

4.

If "

Not finished printing. Finish printing remain-

ing jobs?

" is shown on the Display Screen, press the

OK

 button.

Printing will resume, starting from the page on which
the error occurred.

 (See "

Loading Rolls in the Printer

.")

→P.637

If this error recurs after you reload the roll, remove the
Roll Holder from the printer, push the roll firmly in until
it touches the Roll Holder flange, and reload the Roll
Holder in the printer.

 (See "

Attaching the Roll Holder to Rolls

.")

→P.633

Follow these step to reload a sheet.

1.

Push the Release Lever back.

2.

Load the sheet, aligning it with the guide on the right.

3.

Pull the Release Lever forward.

4.

If "

Not finished printing. Finish printing remain-

ing jobs?

" is shown on the Display Screen, press the

OK

 button.

Printing will resume, starting from the page on which
the error occurred.

 (See "

Loading Sheets in the Printer

.")

→P.660

Because the Platen is soiled with ink or other substances,
the size of the clear film cannot be detected.

Open the Top Cover and clean the entire Platen.

 (See "

Cleaning Inside the Top Cover

.")

→P.825

Error Message 

>

 Messages regarding paper 

>

Paper size not detected.

iPF655

13

882

Summary of Contents for iPF655 - imagePROGRAF Color Inkjet Printer





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands