49
Replacing an Ink Tank
When the printer runs out of ink, replace the empty ink tank with a new one. Specify the following ink tanks
when purchasing.
If the Top Cover is opened more than ten minutes, the Print Head Holder moves to the right side. If this
occurs, close the Top Cover, and open it again.
1
Open the Paper Output Tray and Top
Cover, and then pull down the Inner
Cover.
Push the Open Button above the Paper Output Tray. The
Paper Output Tray automatically opens.
2
Remove the empty ink tank.
Do not touch the Print Head Lock Lever.
3
Install the new ink tank. Press the
mark on the ink tank until it clicks into
place and then its red lamp lights.
4
Put back the Inner Cover and close the
Top Cover when finished.
Black : CLI-8BK
Black : PGI-5BK
Yellow : CLI-8Y
Magenta : CLI-8M
Cyan : CLI-8C
Ensure that all the ink tanks are installed in the order
directed by the label. The printer cannot be used
unless all ink tanks are installed.
The
ALARM
lamp flashes orange if an ink tank is
not installed properly. Open the Top Cover and
make sure that all the ink tanks are installed in the
correct order directed on the label.
Print Head Lock Lever
Summary of Contents for iP5200R - PIXMA Color Inkjet Printer
Page 1: ...Setup Guide...
