4. Check that the stapler unit [1] is at the staple cartridge replacement position as shown in the figure.If it is, close the
finisher front cover to complete the check procedure.
[1]
5. If the staple unit is not at the staple cartridge replacement position, perform the following procedure.
The stapler unit's roller may be riding on the base plate. so, slightly lift the stapler unit [1],and rotate the roller toward you to
correct the position.
[1]
[1]
6. Close the finisher front cover.Open the finisher front cover again, and check that the staple unit is at the staple
cartridge replacement position.
7. Close the finisher front cover.
4. Parts Replacement and Cleaning
70
Summary of Contents for Inner Finisher-L1
