Making Initial Checks
List of Initial Check Items
Item
No.
Check Items
Check
Installation Environ-
ment
1
The value of power voltage is +/- 10% of the specified voltage.
2
The machine is installed away from heat and moisture (near a faucet, water heater, or humidifier),
cold place, source of fire or in an area exposed to dust.
3
The machine is not in a place that generates ammonia gas.
4
The machine is not in a place of direct sunlight.
5
The machine is installed in a well-ventilated place where the machine stands horizontally.
Checking the paper
6
Paper does not absorb moisture or dry out. Set paper by taking it out from a new package to
output.
Checking the con-
sumable parts
7
Check the list of estimated life of consumable parts and replace parts that have reached the
estimated life.
Checking the peri-
odically replaced
parts
8
Replace parts that have reached the estimated life in accordance with the list of periodical serv-
ices and the table of periodically replaced parts.
6. Troubleshooting
116
Summary of Contents for Inner Finisher-L1
