■ Staple-Free Staple Unit
When the clinch motor (M9) drives and the cam rotates once, the clinch arm pinches the paper. The wave-shaped upper teeth
and lower teeth of the clinch arm bite the paper to bind it.
The clinch arm's home position is detected by the clinch HP sensor (PS15).
After power ON, the finisher controller PCB drives the clinch motor (M9) to return the clinch arm to the home position. If the clinch
arm is at the home position to begin with, it remains there and waits.
NOTE:
If the malfunction of the Staple-Free Staple Unit has occurred, the alarm (Alarm code: 61-0002) is notified after the operation of
the machine has stopped as the jam.
When replacing the Staple-Free Staple Unit after the notification of the alarm, perform the following service mode.
• SORTER > FUNCTION > EMSG-CLR
Clinch Arm
Cam
Lower Teeth
Clinch HP Sensor (PS15)
Clinch Motor (M9)
Upper Teeth
Paper
• Number of sheets that can be clinched
Item
Specifications
Remarks
Stapling capacity
A4, B5, LTR, 16K
52 to 64 g/m
2
: 10 sheets or less
More than 64 to 81.4 g/m
2
: 8 sheets or less
More than 81.4 to 105 g/m
2
: 6 sheets
Different depending on the host
machine.
• Stapling a mix of same
width is possible.
• Stapling a mix of different
widths is not possible.
A3, B4, A4R, 11x17, 8K
52 to 64 g/m
2
: 5 sheets or less
More than 64 to 81.4 g/m
2
: 4 sheets or less
More than 81.4 to 105 g/m
2
: 3 sheets
If the staple-free staple setting exceeds the stapling capacity that can be bound, divided delivery is performed. If the upper limit
is exceeded, shift-sort mode is used for the second and subsequent copies.
Example: Divided delivery for 11 A4 (80g/m
2
) sheets
10 sheets are delivered in a stack without stapling. The 11th sheet is delivered by itself.
Related service mode
• Adjustment of staple position for paper feed direction in the staple free stapling mode:
SORTER > ADJUST > FR-STP-X
• Adjustment of staple position for front/rear direction in the staple free stapling mode:
SORTER > ADJUST > FR-STP-Y
• Adjustment of staple free pressure:
SORTER > ADJUST > FR-ST-PS
• Setting of the staple position of staple free stapling:
SORTER > OPTION > FR-ST-PO
• Setting of the staple-free stapling in no staple cartridge:
SORTER > OPTION > FR-ST-SW
• Setting of paper dust removal from the stapler at the staple free stapling:
SORTER > FUNCTION > FR-ST-RP
2. Technical Explanation
30
Summary of Contents for Inner Finisher-L1
